DRYER REPAIR IN KENMORE, WASHINGTON
Dryer Repair in Kenmore, WA
Dryer not working? We repair gas and electric dryers in Kenmore, WA, including Kenmore front load and top load models. Tell us what it is doing. We check the simple things first, then test the parts.
✓ Gas and electric dryers✓ Kenmore dryers✓ Plain-English answers
Safety first. Unplug your dryer before you look inside it.
What is your dryer doing?
Pick the problem for the usual causes.
Not heating→Won’t start→Noisy or drum won’t turn→Not sure? Call us now
Gas and electric
We work on both types of dryer
Kenmore dryers
Models, problems and error code help
Kenmore, WA
7915 NE 205th St, Kenmore, WA 98028
Dryer repair in Kenmore, WA
Your local dryer repair service in Kenmore, Washington
We are an independent dryer repair service in Kenmore, Washington. We repair gas and electric dryers, including Kenmore brand models. Tell us what the dryer is doing and we find the fault.
We repair clothes dryers in Kenmore, WA, from a simple fix to a full repair. Our technician unplugs the dryer, tests the parts and explains the fault in plain words. Does it take two cycles to dry, or stop mid-load? Tell us and we start with the simple checks.
- We start with the simple things. Vent, power, breaker and door come first.
- Safety comes first. We tell you to unplug the dryer, and when to stop.
- You hear the cost before work starts. You decide.
- Gas and electric dryers. The checks are different. We know both.
- Kenmore brand know-how. We look up your model number so the part is right.
At a glance
| Service | Dryer repair and diagnosis |
|---|---|
| Dryers | Gas and electric clothes dryers. Kenmore front load and top load models |
| Common faults | No heat, will not start, noisy drum, belt, thermal fuse, door switch |
| Place | Kenmore, King County, Washington, USA |
| Address | 7915 NE 205th St, Kenmore, WA 98028 |
| Phone | (469) 202-5109 |
| Brand note | Independent repair service. Not part of Kenmore or Sears |
Kenmore the city, Kenmore the brand. “Kenmore” means two things here: the city where we work and the appliance brand many people own. We repair dryers in the city, including Kenmore brand dryers.
Services
Dryer repair services in Kenmore, WA
Pick your dryer’s problem to see the usual causes.
Also repaired: drum glides and seals, motor and blower wheel, timer and control board, wiring, and vent checks. Not on the list? Call and ask. Or browse our dryer guides.
How we find the fault
Gas and electric dryer repair: we test the part before we call it bad
A dryer that will not heat or will not start has a break somewhere in the circuit. We use a multimeter to check the thermal fuse, the heating element, the thermostats and the wiring one by one, so we fix the real problem and not a guess.
- Vent, power and breaker are checked first, because they cause many no-heat calls.
- Each part is tested with the power off and the dryer unplugged.
- You hear what failed and what it costs before any part is fitted.
Kenmore dryer repair for every series, model and part
We repair gas and electric Kenmore brand dryers, from older Sears models to Kenmore Elite, HE and Oasis. Our technician works from your model number, so we match the right part.
Kenmore dryer series
Kenmore 60, 70, 80, 90, 90 Plus, 100, 300, 400, 500, 600, 700 and 800 series dryers. See the Kenmore models page.
Kenmore Elite, HE and Oasis
Kenmore Elite dryer repair for the HE2, HE3, HE4 and HE5, Oasis, Smartheat Quiet Pak 9 and steam dryers. Codes such as F01 are on the error codes page.
Stackable and old models
We also service the dryer in a stacked set, older dryers that still run, and Sears-era models. Models 110, 417, 796, 91392 and 91182 are welcome.
Kenmore dryer problems
Not heating, will not start, noisy, squeaky, a loose drum, or a door that will not stay closed. See all dryer repair services.
Open 24 hours
Gas or electric, it starts with one call.
Free dryer repair and repair prices
Repair prices depend on the fault, and we quote before work starts. See pricing. Free repair is possible only when the dryer is under warranty or recall. Read the warranty guide.
Kenmore dryer parts we replace
Pick a part to see the fault signs and what the repair involves.
Heat and temperature
Controls and sensors
Airflow and extras
Need a diagram or manual? Use the manuals, diagrams and DIY help guide.
Our process
Our dryer repair process, from first call to a working dryer
Four steps. No guessing, no surprises.
Call or send the form
Tell us the brand, the model if you have it, and what the dryer does.
We check the simple things
Vent, power, breaker and door come first.
We test the parts and quote
We test the part with a meter. You hear the fault and the cost before work starts.
Repair and test run
We fit the part, run the dryer and check the heat and the drum.
Repair or replace
Repair or replace a dryer? How to decide
We tell you what we see so you can decide. These are the questions that matter.
Repair usually makes sense when
- The dryer is otherwise in good shape.
- The fault is one part, like a belt, fuse or switch.
- The repair costs much less than a new dryer.
- A warranty, plan or recall covers it. Check how.
Replacement may make sense when
- The dryer is old and other parts are worn.
- The part is a motor or control board and the dryer is not new.
- The dryer overheats again and again.
- The repair would cost close to a new dryer.
What to expect
Common dryer repairs in Kenmore and what to expect
Typical scenarios, not individual customer jobs.
Cost: it depends on the part. We quote first.
Where we work
Where we work: Kenmore, WA and nearby
We are at 7915 NE 205th St, Kenmore, WA 98028, where the Sammamish River meets Lake Washington, about 12 miles northeast of downtown Seattle.
Kenmore neighborhoods include Arrowhead, Inglewood, the Moorlands, Downtown Kenmore and Northlake Terrace. Lake Forest Park and Kirkland are next door. Bothell, Shoreline and Woodinville are a short drive away.
Not sure if we reach your street? Call or send your ZIP code and we will tell you straight away.
7915 NE 205th St
Kenmore, WA 98028, USA
The map loads from Google only when you tap the button.
Before you call
Four dryer checks before you call for repair
Want to try the simple fixes first? Safety first: unplug the dryer. Then work through these in order. Most no-heat and no-start calls start here.
- 1
Clean the lint trap and vent
Look at the vent hose behind the dryer. A crushed or clogged vent is a common reason for no heat.
- 2
Check the breaker
Electric dryers use a double breaker. One half can trip while the other stays on.
- 3
Check the door
A dryer will not run if the door does not close and latch.
- 4
Check the gas valve
On a gas dryer, make sure it is open. If you smell gas, leave and call the gas company.
Problems and error codesManuals, parts and DIY helpWarning signs and fire safetyWarranty and free repairPricing
Who we are and how to reach us
Northshore Dryer Repair is an independent dryer repair service in Kenmore, Washington. We explain the fault and the cost before any work starts. Read about us, how pricing works and our disclaimer.
Business details
Northshore Dryer RepairKenmore, WA 98028, USA
Page last reviewed October 30, 2026 by Northshore Dryer Repair. Read our editorial policy to see how we write and check our pages.
What our customers say
Customer reviews
Customer reviews will be shown here, with the customer’s permission.
Used our service? Tell us how it went. We publish reviews only with the customer’s permission.
Case studies
Dryer case studies: what the research shows
These are three cases from public safety records. They are not our customer jobs. Each one links to its source.
Dryer fires in homes: what the U.S. Fire Administration found
What happened. In its 2008 to 2010 data, the U.S. Fire Administration estimated about 2,900 clothes dryer fires a year in homes. They caused about 5 deaths, 100 injuries and $35 million in property loss each year. The leading cause was failure to clean, at 34 percent.
What it means for you. A clogged lint trap or vent is the most common fault and the easiest to check. So the lint trap and vent come first on every visit.
Source: U.S. Fire Administration, 2012 report summary · Warning signs and fire safety
Recalled Kenmore Elite gas dryers: the gas valve that would not shut off
What happened. In August 2012 the U.S. Consumer Product Safety Commission recalled about 21,000 LG and Sears Kenmore Elite gas dryers. The gas valve could fail to shut off, so the dryer kept heating after the cycle ended. There were 141 complaints and three minor burns. The fix was a free gas valve repair.
What it means for you. If you own a Kenmore Elite gas dryer from the 796 model family, check the model number on the label inside the door against the recall notice. Stop using an affected dryer until it is repaired.
Source: U.S. Consumer Product Safety Commission, recall 12-251 · Find your Kenmore model
Gas or electric: what the fire numbers say
What happened. An NFPA fact sheet shared by the U.S. Department of Energy counts about 17,700 home fires in 2006 involving clothes dryers or washing machines. Of the fires that spread beyond a small container, 81 percent started in a laundry room or area. Gas dryers carried a slightly higher fire risk than electric ones. Failure to clean was the leading cause at 29 percent.
What it means for you. Both gas and electric dryers need a clear vent. On a gas dryer, treat any gas smell as an emergency: leave the home and call 911 or your gas utility. Gas repairs are for a technician.
Source: U.S. Department of Energy, NFPA dryer fact sheet (2006 figures) · Gas dryer repair
FAQ
Frequently asked questions about dryer repair in Kenmore, WA
Clear answers on cost, timing, safety and what we repair. If your question is not here, call or send the quote form.
Still not sure?
Tell us what the dryer is doing and we will point you the right way.
Send us a message or use the Call button at the top of the page.
How much does dryer repair cost in Kenmore, WA?
It depends on the fault and the part. A blocked vent costs less than a failed motor or control board. Call us, tell us what the dryer does, and we explain the repair and the cost before work starts. See the pricing page.
Do you repair Kenmore brand dryers?
Yes. We repair Kenmore dryers, front load and top load, gas and electric. We are an independent repair service and are not part of Kenmore or Sears.
Kenmore dryer repair near me: do you cover my address in Kenmore, WA?
Yes, we are based at 7915 NE 205th St, Kenmore, WA. Check the service area page or call with your street or ZIP code.
Why is my dryer not heating?
Usually a blocked vent, a tripped breaker, a blown thermal fuse or a failed heating part. Check the vent and the breaker first. Read the not-heating guide.
Why won’t my dryer start?
Check the power, the breaker and the door first. A failed door switch, start switch or thermal fuse can also stop it. See the won’t-start steps.
Why is my dryer so noisy?
A thump often means a worn belt or rollers. A squeal often means the idler pulley or motor bearing. Do not run a dryer that grinds. Read the noise and belt guide.
Do you repair gas dryers and electric dryers?
Yes. An electric dryer uses a double breaker and a heating element. A gas dryer uses an igniter and gas valve coils. Gas work is for a technician.
Is it safe to keep using a dryer that gets too hot?
No. Stop, unplug it and call us. Lint and a blocked vent trap heat. Read the warning signs and fire safety guide.
Is a Kenmore dryer repair ever free?
Only when a warranty, service plan or recall covers it. Check your paperwork first. See how to check.
How do I find my Kenmore dryer model number?
Open the door and look on the door frame. It can also be on the back or side of the cabinet. See where to look.
Do you offer same-day dryer repair in Kenmore?
It depends on the day’s bookings and on whether the part is on hand. Call us and we give you the earliest visit we can, and tell you if a part has to be ordered.
Is this the Kenmore customer service phone number?
No. Kenmore is a brand name. We are an independent repair service in Kenmore, WA. For the brand’s own customer service, use the contact details in your dryer manual.
Do you repair Kenmore Elite, HE, Oasis and older Sears dryers?
Yes. We repair Kenmore Elite HE2 to HE5, Oasis, steam and older Sears-era dryers, gas and electric. Models starting with 110 were built by Whirlpool. We match the part to your model number. See the Kenmore models page.
What does the F01 error code mean on a Kenmore dryer?
On a Kenmore Elite HE3 dryer, F01 means the main control board has failed. Turn the dryer off at the breaker for 10 minutes, then restart it. If F01 comes back, call us. See the error codes page.
Is there a fee just to look at my dryer?
Ask us when you call. We tell you any call-out or diagnostic fee, and the likely repair price, before we start.
What warranty comes with a repair?
Ask for the warranty terms on parts and labor when you get your quote, and keep them with your receipt.
What should I do before the technician arrives?
Clear a path to the dryer, empty the drum and clean the lint filter. Have the model number ready. If you smell gas, leave the home and call your gas utility before anything else.
Sources and safety references
The safety facts on this page come from public sources. We link to each one so you can check it yourself.
- 1Fire safetyClothes Dryer Fire Safety, U.S. Fire AdministrationLint, filter and exhaust duct checks that lower fire risk.Open source ↗
- 2Gas safetyNatural Gas Safety Tips, Puget Sound EnergyWhat to do if you smell gas.Open source ↗
- 3EfficiencyClothes Dryers, ENERGY STARHow to judge efficiency when you compare a repair with a new dryer.Open source ↗
Ready to book a dryer repair in Kenmore?
Call and tell us what the dryer is doing.